PoE Splitter

Download Datasheet

Introduction

PoE Splitter is compliant with IEEE802.3af standard, which can split data and power from PoE signal. It perfect match camera enclosure and can split Ethernet and power from ethernet cable for these device which can not support PoE. It can work with standard PoE Switch or PSE device, compatible with mid-span and end-span, output 12V/1.1A power by DC terminal, It is widely used in security surveillance and network project.

 

Features

  • IEEE 802 3af Power over Ethernet Standard Compliance;
  • Compatible with mode A (End-Span) and mode B (Mid-Span);
  • 12V /1.1A DC Power Output;
  • Excellent circuit isolation protection;
  • More than 82% conversion efficiency.

 

Board Diagram

Specification

ItemDescription
PoEProtocolIEEE803.2af
ModeSupport Mode A (End-Span) and Mode B (Mid-Span)
InputPoE 36V~57V
OutputDC 12V,≤13W
Ethernet Port1 x RJ45 Input
Transmission Speed10/100Mbps
Transmission MediumCat5/5e/6 Standard Network Cable
Distance100m (Max.)
Status LED IndicatorYellow:PoE,Green:DC OUT
ProtectionSurge3 level ,Standard:IEC61000-4-5
ESD3 level ,Standard:IEC61000-4-2
EnviromentWorking Temperature-30 C~60 C
Storage Temperature-40 C~85 C
Humidity (Non-condensing)0~95%
Mechanics Dimension (L x W x H)260mm×36mm×26mm
MaterialPlastic
ColorBlack
Weight42g